Product Description
6mm Dry Drill Bits For Porcelain, Ceramic, Glass ,Mirror
Extreme set of 6mm drill bits for ANY tiles
- 6 mm Tungsten carbide sharp point drill bit
- 6 mm diamond vacuum brazed core drill bit
6mm is optimal for all your needs:
Size of red wall plug
Small and solid enough to pre-drill bigger size hole
- Diamond drill bit is extreme for hardest materials like 4/5 grade porcelain tiles
- For less demanding jobs like ceramic tiles tungsten carbide sharp point tile drill bits are easier to operate and cost less
- Set two of them is a perfect solution for drilling any tiles, stones
- Just start with sharp pointed tungsten carbide drill bit ,only when you can see it is not going easy like knife in a butter switch for another diamond coated one
- Quick fit allow to change drill bites so fast
- The second drill bit in a set start much easier because sharp point
- Set of two drill bites so different ,but together able to drill any tiles efficiently ,fast, without water with long life.
- Diamond coated drill bit tested above 30 holes in hardest porcelain floor tiles
- No water required
- We drilled 32 holes one by one for being safe we dipped drill bit once per hole in a water, but drill bit seems to operate better when is dry.
- Self cooling with wax inside that melts and lubricates whilst drilling last for a life of drill bit
- Test was done by cordless drill on second speed
- Only use for drilling the tile, not the material behind the tile.
- Apply the drill bit at an incline to start drilling(angle of 15° to 30°)and gradually straighten it up (please see picture)
- Ensure hammer action is switched off
